1. Click Setup > Settings.
2. Set Use Scramble Pairings to Yes.
3. Click Bracketing > Scramble Pairings.
4. Select the wrestling style from the drop-down.
5. Set the Weight Tolerance, Division Tolerance, Skill Tolerance, Desired Match Count, and Max Allowed Match Count as needed.
6. Click View Possible Pairings to view potential matches.
7. Click Auto Pair to generate pairings.
8. Click Create Selected Matches to create the matches.
9. Click Delete Selected Pairings to delete matches if needed.
10. Use Pair and Don't Pair links to prevent specific wrestlers from being matched.

Weight Tolerance: Specify the range of actual weights to use when creating pairings.

Division Tolerance: A division tolerance of '1' would allow pairings between wrestlers one division above and one division below any wrestler's own division.

Skill Tolerance: A skill tolerance of '1' would allow pairings between wrestlers with separation criteria one above and one below any wrestler's own separation criteria.

Desired Match Count: This is the number of matches the system will try to create using the specified settings.

Max Allowed Match Count: This is the maximum number of matches some wrestlers may get in order to get the desired match count for other wrestlers.

Teams: This setting may be used to create matches between certain schools. Use the control key to highlight the teams to use or specify all teams if desired.